JagoBlitz
5000rpm
Posts: 8
Joined: Aug 2018
Germany

Roll Center Adjuster vs Anti Roll Bars

#1

Hello,

I would like to improve the roll behavior of my lowered (13" center of the wheel to fender) AP2 and not sure what route I should go.
I am considering roll center adjusters or stiffer sway bars.

I like the idea of the roll center adjusters because it will keep the suspension more independent. Unfortunately, I cannot find a lot of reviews on this topic.
Does anybody have experience with fornt and rear roll center adjustern with an AP2?
Thanks.

Regards,
JagoBlitz
User avatar

andrewhake
Admin
Posts: 580
Joined: Oct 2016
Location: Mt. __________
Contact: YouTube IG
United States of America
#2

What spring rate do you use now? Stiffer anti roll bars will have a larger effect than roll center adjustment and is an easier and likely cheaper option so might be the option to try first.
o_O S2000 | Mark I Stage II...

That’s thirty minutes away. I’ll be there in ten.

Topic Author
JagoBlitz
5000rpm
Posts: 8
Joined: Aug 2018
Germany
#3

Öhlins 10k/10k

Topic Author
JagoBlitz
5000rpm
Posts: 8
Joined: Aug 2018
Germany
#4

@andrewhake

How did the handling change with the Roll Center Adjusters?
You have 9mm front and 12m rear? Right?
User avatar

andrewhake
Admin
Posts: 580
Joined: Oct 2016
Location: Mt. __________
Contact: YouTube IG
United States of America
#5

JagoBlitz wrote: Aug 16th, 2020, 11:10 am @andrewhake

How did the handling change with the Roll Center Adjusters?
You have 9mm front and 12m rear? Right?
Hard to quantify a handling change just based on the RCA, but you can think of adding roll center adjustment like adding a stiffer sway bar, so this has an effect of increasing the roll resistance in the rear. So more low speed-midspeed neutral/oversteer end of things.
o_O S2000 | Mark I Stage II...

That’s thirty minutes away. I’ll be there in ten.

Return to “Geometry”