Ohlins DFV Discussion

Official topic questions and setup.

User avatar

Topic author
Site Admin
Posts: 520
Joined: Oct 2016
Location: Mt. __________
United States of America

Re: Ohlins DFV Discussion


Jul 13th, 2019, 10:31 pm

JagoBlitz wrote:
andrewhake wrote:
JagoBlitz wrote:Hi,

congrats on this nice forum. I like it.

I am currently running Ohlins with the 10k/8k setup.
How much would the handling and balance change if I switched to 10k/10k?

Thanks! In my opinion it would change only for the better and make the car much closer to neutral. The 8k rear springs just aren't stiff enough with the travel in the rear of the S2000 being quite small.
You were right. As expected, 10/10 gives way more neutral handling.
At least for the AP2 10/10 is the way to go IMHO.
Glad to hear it worked well for you!
o_O S2000 | Mark I Stage II... | Touge Map | Parts | S2000 Lap Times Database

That’s thirty minutes away. I’ll be there in ten.

Posts: 7
Joined: Aug 2018

Apr 30th, 2021, 8:35 am

andrewhake wrote: The thing to keep in mind about adjusting the preload is that you can't add compression travel without sacrificing rebound travel and vice/versa. More compression travel can be nice, so the damper can compress effectively, but if there isn't much rebound travel the rear end can still react in a way that is difficult to deal with after the compression stroke is done.
What's your preferred ratio of compression and rebound travel? 50/50?

How much preload would you run with 10k springs?

Return to “Spring & Dampers”